Tel: 0571-88968775 88968767

Stocks search

ABOUT US

Hangzhou Tongli Transmission Technology Co., Ltd.

Hangzhou Tongli Transmission Technology Co., Ltd. (former Hangzhou Heyu Bearing Co., Ltd.) is committed to bearing sales and relevant technological services. It is located in Hangzhou, Zhejiang Province where there is scenic beauty and advanced traffic condition.Since establishment, the Company has developed friendly cooperation with the world-famous bearing manufacturers like TPI, NTN, SKF, INA/FAG/LUK, ASAHI, NSK and NACHI.
MORE
PRODUCTS
Deep groove ball bearing

Deep groove ball bearing

Deep groove ball bearings are the most common type of rolling bearings.The basic deep groove ball bearing consists of an outer ring, an inner ring, a set of steel balls and a set of cages. The deep groove ball bearing types are single row and double row. The deep groove ball structure is also divided into two types: sealed and open.

MORE >
Self-aligning roller bearing

Self-aligning roller bearing

Spherical roller bearings have double row rollers, the outer ring has one shared spherical raceway, and the inner ring has two raceways that are inclined at an angle relative to the bearing axis. This ingenious construction makes it self-aligning and therefore not susceptible to axial or bearing housing angle errors or shaft bending. It is suitable for installation errors or shaft deflections that cause angular errors. In addition to being able to withstand

MORE >
Needle bearing

Needle bearing

A needle bearing is a roller bearing with a cylindrical roller that is thin and long relative to its diameter. This type of roller is called a needle roller. Despite the small cross-section, the bearing still has a high load bearing capacity, and the needle bearing is equipped with a thin and long roller (roller diameter D ≤ 5 mm, L / D ≥ 2.5, L is the roller length), so The radial structure is compact, its inner diameter size

MORE >
Angular contact ball bearing

Angular contact ball bearing

Single row angular contact ball bearings can only withstand axial loads in one direction and will cause additional axial forces when subjected to radial loads. And can only limit the axial displacement of the shaft or housing in one direction. Angular contact ball bearings have a contact angle of 40 degrees and can withstand large axial loads. Angular contact ball bearings are non-separable designs with different shoulder heights on the

MORE >
NEWS
Copyright © 2019 - Hangzhou Tongli Transmission Technology Co., Ltd. Technical Support - Bearing.cn 浙ICP备19013626号-1